4. Connect the cooler to the hoses
Required time: 3 Min.
Cooler connections
To connect the cooler, first attach the flexible water inlet hose of the cooler to the cold water angle valve. Then firmly insert the black adapter of the blue hose for filtered water into the connection bracket of the cooler. Secure with the red safety clip. To connect the LED display to the cooler, carefully plug the black electronic cable from the tap into the cooler. Do not use too much force, otherwise there is a risk of damage. Also make sure that it is seated correctly, only one direction is possible. Now you can connect the power cable and position the cooler in the base unit, making sure that it is correctly positioned above the exhaust air hole. The cooler must no longer wobble or slip slightly.
Opening the water supply
Now you can open the angle valves and establish power supply.