Complete the installation of the revision shaft by breaking off, and if necessary, carefully cut off all parts of the revision shaft that extend beyond the tiles to ensure the plate is installed flush with the wall. Insert the blue retaining clamps into the revision shaft and open the angle valve.
Now insert the appropriate screws, depending on the depth of the shaft, into the blue brackets and lock the sliders in the retaining clamps. The depth of the screws can be adjusted by hand or with the screwdriver. Alternatively, the screws can first be secured to the magnets of the flush plate.
Then connect the hose of the waste valve with the flush plate. Finally, attach the flush plate with the small magnets and press firmly.
